Description

The premium BOD incubators of the ZXSD-R series from LABWIT are designed to meet a variety of advanced experimental needs, ranging from BOD determination to incubation of micro-organism cultures, preservation of samples, Drosophila incubation, and determination of enzymatic activities, to any applications that need incubation at close to ambient temperature or lower. It features a 4.3’’ TFT touch screen panel, which ensures clear indication as well as easy operations. Each of the four models has a wide temperature range from ambient -18 °C (minimum 4°C) to 65 °C and can be operated at a single user-defined temperature but can also be programmed with up to 9 different temperature segments within a time frame (18 steps). The (cooling) compressor runs continuously, and the control is done through a solenoid valve for more precise temperature control if temperatures lower than ambient temperatures are required.

Features

▶ P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and programmable mode.

▶ 4.3’’ TFT touchscreen panel displays all parameters, easy operation and readout for all control modes. 

▶ Three-dimensional airflow system ensures fast response and high uniformity of ±1.0°C @ 37°C. 

▶ Sound cooling system with CFC-free refrigerant, ozone layer friendly.

▶ Automatic defrosting: only minimal ice formation and very low heat discharge into the working area occur; the unit can continue operating when defrosting.

▶ Real-time electronic timer from 0 to 9999 minutes. 

▶ 3 steps adjustable fan speed, offering a more precisely controlled environment for incubation, without concerns of media or samples drying out. 

▶ Non-volatile memory retains pre-set parameters in case of power interruption. 

▶ Triple safety protections for samples, incubator and environment. 

▶ Independent device for overtemperature, high current flow and electric leakage. 

▶ Standard configurations: a double-layer tempered glass observation window in the outer door, an inner glass door, forced air circulation, a fluorescent lamp, a 50 mm test port and 2 grids, and a built-in printer.

▶ Optional UV Lamp, RS-232, RS-485 interface available.