Description

The economic BOD incubators ZXSD-B Series from LABWIT are designed to meet a variety of advanced experimental needs, ranging from BOD determination to incubation of micro-organism cultures, preservation of samples, Drosophila incubation, and determination of enzymatic activities. All these applications require precise and constant temperature control. Each of the four models has a wide temperature range from ambient -18 °C (minimum 4°C) to 65 °C and can be operated at a single user-defined temperature but can also be programmed with up to 9 different temperature segments within a time frame. (18 steps). The (cooling) compressor runs continuously, and the control is done through a solenoid valve for more precise temperature control if temperatures lower than ambient are required.

ZXSD-series BOD incubators also feature a backup program; in case of power failures, the stored parameters remain in the memory of the microprocessor. Your experiment, therefore, resumes under the same conditions even when interrupted by a power interruption.

Features

▶ P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and program mode.

▶ Large blue LCD display for temperature diagram, easy readout for program control. 

▶ Three-dimensional heating system ensures fast response and high uniformity of ±1.0°C @ 37°C. 

▶ Sound cooling system with CFC-free refrigerant. 

▶ Automatic defrosting: only minimal ice formation and very low heat discharge into the working area occur; the unit can continue operating when defrosting.

▶ 3 steps adjustable fan speed, offering a more precisely controlled environment for incubation, without concerns of media or samples drying out. 

▶ Real-time electronic timer from 0 to 9999 minutes. 

▶ Password protection of all parameters against unauthorised access.

▶ Non-volatile memory retains pre-set parameters in case of power interruption. 

▶ Triple safety protections for samples, incubator and environment. 

▶ Independent device for overtemperature, high current flow and electric leakage. 

▶ Standard configurations: a double-layer tempered glass observation window in the outer door, an inner glass door, forced air circulation, a fluorescent lamp, a 50mm test port and 2 grids. 

▶ Optional built-in printer, UV lamp, and RS-232 interface available.